MoTeC ACL VIM - Manual (Page 34)

30 Installation & Configuration
ACL Central Logger
ACL Mounting
Dimensions
Refer to Appendix Q: ACL Case Dimensions.
Attachment
Attach at the four mounting points using M3 screws. Do not over tighten
the screws to avoid twisting the case.
Vibration isolation will help prolong the unit life if the vehicle vibrates
severely.
Note The maximum internal operating temperature for the ACL is
85 °C, so it should not be mounted in a position where it will be
exposed to temperatures that will cause an internal temperature greater
than this.
Orientation
The ACL may be mounted in any orientation however the following
points should be considered.
Mount so that the connectors can be easily accessed, particularly the
5 pin communications connector, which is used for configuration and
data unload.
Mount so that the status LEDs are visible.
ACL Wiring
Pin Connection Details
Refer to Appendix P: ACL Pin List by Pin Number
Connector
The ACL uses a 22 pin Auto Sport connector for device connection and
power, and a 5 pin Auto Sport connector for PC Ethernet
communications.
Refer to Appendix M: Connector Details.