Intended use, Restrictions, Basic safety instructions – Burkert Type 2300 User Manual
Page 5
5
Intended use
2.
INTENDED USE
Non-intended use of the angle-seat control valve Type
2300 may be a hazard to people, nearby equipment and the
environment.
• The device is designed for the controlled flow of liquid and
gaseous media. Operation is possible only in combination with a
suitable control unit.
• The admissible data, the operating conditions and conditions of
use specified in the contract documents, operating instructions
and on the type label are to be observed during use. The desig-
nated application cases are specified in the chapter entitled
• The device may be used only in conjunction with third-party
devices and components recommended and authorised by
Bürkert.
• Correct transportation, correct storage and installation and
careful use and maintenance are essential for reliable and fault-
less operation.
• Use the device only as intended.
2.1.
Restrictions
If exporting the system/device, observe any existing restrictions.
3.
BASIC SAFETY
INSTRUCTIONS
These safety instructions do not make allowance for any
• contingencies and events which may arise during the installation.
operation and maintenance of the devices.
• local safety regulations; the operator is responsible for observing
these regulations, also with reference to the installation personnel.
DANGER!
Danger – high pressure!
• Before loosening the lines and valves, turn off the pressure and
vent the lines.
Risk of electric shock!
• Before reaching into the device, switch off the power supply
and secure to prevent reactivation!
• Observe applicable accident prevention and safety regulations
for electrical equipment!
WARNING!
Risk of injury when opening the actuator!
The actuator contains a tensioned spring. If the actuator is
opened, there is a risk of injury from the spring jumping out!
• The actuator must not be opened.
Risk of injury from moving parts in the device!
• Do not reach into openings.
english
Type 2300