Burkert Type 2300 - Manual (Page 7)

7
General information
4. GENERAL INFORMATION
4.1. Contact address
Germany
Bürkert Fluid Control System
Sales Centre
Chr.-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
E-mail: [email protected]
International
Contact addresses are found on the final pages of the printed oper-
ating manual.
You can also find information on the Internet under:
www.burkert.com
4.2. Warranty
The warranty is only valid if the device is used as authorized in accor-
dance with the specified application conditions.
4.3. Information on the internet
The operating instructions and data sheets for Type 2300 can be found
on the Internet at:
www.burkert.com
5. PRODUCT DESCRIPTION
5.1. General description
The 2/2-way angle-seat control valve Type 2300 is suitable for liquid
and gaseous media.
It uses neutral gases or air (control media) to control the flow of
water, alcohol, oil, fuel, hydraulic fluid, saline solution, lye, organic
solvent and steam (flow media).
The operation of the angle-seat control valve Type 2300 is possible
only in combination with an control unit. Possible control units are:
Positioner Type 8692, 8694 and 8696
Process controller Type 8693
5.2. Versions
There are 2 versions of the angle-seat control valve Type 2300.
• Standard version – without separate Ex type label.
The standard version must not be used in the potentially explosive
area.
• Ex version – with separate Ex type label.
The Ex version may be used in the potentially explosive area. In
doing so, observe the specifications on the separate Ex type label
and the additional information enclosed with the device together
with safety instructions for the Ex area.
english
Type 2300