Hach-Lange SIGMA SD900 Refrigerated Sampler and All Weather Refrigerated Sampler User Manual - Manual (Page 29)

27
Installation
3.3.3 Multiple bottle installation
Use multiple bottles to collect samples into separate bottles or into
more than one bottle. A distributor positions the sample tube over
each bottle. Position the bottles in the sampler as shown in the
following installation sections. Refer to
Figure 3 on page 11 or
Figure 4 on page 12 for a diagram of required components.
Figure 10 Full bottle shut-off installation
1 Refrigerated sampler 7 Full bottle shut-off assembly
2 Inside tube fitting 8 Threaded hole
3 Retainer pin 9 Twist clip
4 Tubing support (refrigerated sampler) 10 All weather refrigerated sampler
5 Thumbscrew 11 Tubing support (AWRS)
6 Slots