Hach-Lange SIGMA SD900 Refrigerated Sampler and All Weather Refrigerated Sampler User Manual - Manual (Page 34)

32
Installation
3. Place the retainer over the bottles.
Note: If using 350-mL glass bottles, place the bottles around the
outside of the retainer.
4. Place the bottle tray in the refrigerator. Align the wires on the
bottom of the tray so that they set in the refrigerator
compartment base slots.
5. Program the sampler.
Figure 15 Refrigerated 24 bottle installation
1 Base of refrigerator compartment (refrigerated sampler) 6 Positioner slot for bottle tray
2 Bottle tray (Cat. No. 1511) 7 Front of sampler
3 1-L poly bottles (24x) 8 350-mL glass bottles (24x)
4 Retainer (Cat. No. 1322) 9 Retainer (Cat. No. 1056)
5 Bottle one indicator wire