Hach-Lange SIGMA SD900 Refrigerated Sampler and All Weather Refrigerated Sampler User Manual - Manual (Page 33)

31
Installation
3.3.3.3 24 bottle installation
Use 24 bottles to collect samples into 350-mL or 1-liter bottles.
Prerequisites:
• 24 plastic or glass bottles
• Retainer
Note: Refer to Figure 3 on page 11 or Figure 4 on page 12 to make
sure that the correct sample bottles are used with the correct retainer.
Installation procedure:
1. Clean the sample bottles as described in section 3.3.1 .
2. Place the bottles into the bottle tray. Looking down on the tray,
bottle one is the first bottle to the left of the bottle one indicator
wire. For Refrigerated Samplers, refer to
Figure 15 on page 32 .
For All Weather Refrigerated Samplers, refer to Figure 16 on
page 33 .
Figure 14 AWRS eight bottle installation
1 Removable tray 5 Bottle one indicator wire
2 Bottle tray (Cat. No. 1511) 6 Positioner slot for bottle tray
3 2.3-L (0.6-gal) poly or 1.9-L (0.5-gal) glass bottles (8x) 7 Front of sampler
4 Retainer (Cat. No. 1322)