Hach-Lange SIGMA SD900 Refrigerated Sampler and All Weather Refrigerated Sampler User Manual - Manual (Page 31)

29
Installation
3.3.3.2 Eight bottle installation
Use 8 bottles to collect samples into 1.9-liter (0.5-gallon) glass or
2.3-liter (0.6-gallon) bottles.
Prerequisites:
• 8 plastic or glass bottles
• Retainer (Cat. No. 1322)
Installation procedure:
1. Clean the sample bottles as described in section 3.3.1 .
2. Place the bottles into the bottle tray. Looking down on the tray,
bottle one is the first bottle to the left of the bottle one indicator
wire. For Refrigerated Samplers, refer to
Figure 13 on
page 30 ). For All Weather Refrigerated Samplers, refer to
Figure 14 on page 31 .
3. Place the retainer over the bottles.
4. Place the bottle tray in the refrigerator. Align the wires on the
bottom of the tray so that they set in the refrigerator
compartment base slots or the All Weather Refrigerated
Sampler slots.
5. Program the sampler.
Figure 12 AWRS two and four bottle installation
1 Removable tray (AWRS) (Cat. No. 5697600) 3 Removable tray
2 10-liter (2.5-gal) plastic or glass bottles (2x) 4 10-liter (2.5-gal) plastic or glass bottles (4x)