Hach-Lange SIGMA SD900 Refrigerated Sampler and All Weather Refrigerated Sampler User Manual - Manual (Page 51)

49
Sampler operation
4.4.5 Restore default settings
Use the restore option to set all program parameters to the
default settings.
Procedure:
1. Select PROGRAM SETUP > RESTORE from the main menu.
2. Select YES to restore the factory default settings.
4.4.6 Store programs as presets
Use the presets option to store up to three sampler programs for
later use. If any changes are made to a preset program after it is
loaded, the program must be stored again to save the changes.
Procedure:
1. Select PROGRAM SETUP > PRESETS from the main menu.
2. The three available presets are displayed as P1 , P2 and P3 .
Select one of the presets.
Note: If a program is already stored, the site ID for that program will
appear to the right of the preset number. If no preset program has
been stored, the preset field will be empty.
3. Select STORE CURRENT to store the current program as
a preset.
4.4.6.1 Load a stored program
Use the load program option to use a preset program as the
current program.
Procedure:
1. Select PROGRAM SETUP > PRESETS from the main menu.
2. Select one of the presets ( P1 , P2 or P3 ).
3. Select LOAD PROGRAM to load the selected preset as the
current program. The selected preset program will be loaded
and the display will return to the main menu. The program can
be modified or used as is.
If a preset program is loaded and then modified, the program
must be stored again (store current) to save the changes.