FEC AFC1500 User Manual
Page 108
Advertising
AFC1500 Multi-2 Unit Hardware Manual (Rev2.1)
PAGE 5 - 64
Chapter 5: Control Interfaces
After the fastening result data has been selected, download the configuration to the MULTI-2
controller. The setup for this configuration is part of the “PLC SIGNAL OUTPUT FORMAT”.
PLC Program
Read_Tag needs be added to the “Controller Tags” for message transfer
This data tag contains the configuration of the message transfer.
Each MSG command needs to have its own Read_ tag.
The MSG command is used for transferring the fastening result.
Advertising