FEC AFC1500 User Manual
Page 111
AFC1500 Multi-2 Unit Hardware Manual (Rev2.1)
PAGE 5 - 67
Chapter 5: Control Interfaces
An example of a message transfer program is shown below.
This program transfers up to 800 bytes of fastening result data.
The first MSG command has “1” as attribute and is sending the data into AFC1500:C memory
block. The second MSG command has “2” as attribute and sending the data into another data
memory block that would have been manually added when the second Read_tag was added.
Note: The above information contained in this procedure are meant for REFERENCE ONLY when
configuring an FEC Ethernet I/P interface using FEC AFC User Console Software, FEC AFC1500
Multi Nutrunner System, Rockwell Automation RSlogix 5000 software and Allen- Bradley
CompactLogix L32E hardware. Actual application configuration may differ from this set-up.