FEC AFC1200 User Manual
Page 34
)(& ,QF
1ST STEP TIME
Amount of time used to complete the 1st Step of fastening.
FINAL STEP TIME
Amount of time used to complete the Final Step of fastening.
REVERSE PEAK TORQUE
Highest torque value measured during reverse operations.
CURRENT
Measured current drawn by the servo to perform the final
torque (Ampers).
ZERO
Torque Preamplifier Voltage level measured during the Zero
Check function.
CAL
Torque Preamplifier Voltage level measured during the last
Calibration Check function.
DUTY CYCLE RATIO %
Spindle Rotation Time divided by Total Cycle Time x 100 =
Duty Cycle Ratio %
SPINDLE STATUS
Result of fastening:
ACCEPT
= ACC
REJECT
= REJ
ABNORMAL
= ABN
EM STOP
= STOP
RETRY
Spindle status identification for a retry during the fastening
cycle. Example: (R ACC) = Retry with final accept.
TIME
The clock time the fastening finished
Chapter 7: System Operation
Page 7-34