FEC AFC1200 User Manual
Page 66
)(& ,QF
7.9.4 Screen Operation [System Configuration (2)]
4-1.
After selecting [SYSTEM CONFIGURATION] from the menu bar, move the cursor on
the menu bar to [PAGE UP] or [PAGE DOWN] and depress the
[↵]
key until the
screen displays [SYSTEM CONFIGURATION (2)]. DEpress the [SEL] key. THe
screen will change to the set mode with the first item (DATE :??/??/??) highlighted.
4-2.
To change the date and time, use the numerical keys and the
[←]
[→]
keys. EAch
number must be keyed in and the cursor must be moved to the next number using
the
[←]
[→]
keys. use the
[↑]
[
↓
]
to change from date to time or vice versa.
4-3.
To change any of the 11 preset values for [SYSTEM CONFIGURATION (2)], the item
must first be selected using the
[↑]
[
↓
]
keys. the
[←]
[→]
keys are used to select
the desired value from the available options. after each item is set the
[↵]
must be
pressed to confirm the setting prior to going to another item. (Refer to Section 7.9.2.2
screen explanation for details of available settings.)
4-4
the configuration of the header and line format areas of System Configuration
screens (1), (2) and (3) is covered in Section 7.9.7.
4-5.
After completing all desired changes, depress the [SEL] key and the question "DATA
CHANGE OK?" will appear. Select YES or NO and depress the
[↵]
key.
FIG. 7-9-4 screen operation [SYSTEM CONFIGURATION (2)]
Chapter 7: System Operation
Page 7-66