FEC AFC1200 - Manual (Page 84)

)(& ,QF
7.14.3 Screen Operation
3-1. To begin presetting for file utilities, insert a formatted disk in the floppy drive as
required and depress the [SEL] key. The cursor will highlight the [ ] FASTENING
PARAMETER field. To activate a file type for a utility function, move the highlighted
cursor to the desired item using the
[↑] [↓]
key and depress the
[±]
key. An [*] in the
window indicates selection.
3-2. After selecting the desired file types, enter the [FILE NAME] information using the
alphanumeric pulldown menu. Select "INPUT END" from the menu and depress
[↵]
upon completion of data entry. The entered name will appear in the field and the
pulldown alphanumeric window will close.
3-3. Move the cursor to the [DRIVE] position. Use the
[←] [→]
keys to select the desired
drive.
3-4.
After selecting desired drive, enter the [PATH] information using the alphanumeric
pulldown menu. Select "INPUT END" from the menu and depress
[↵]
upon
completion of data entry. The entered name will appear in the field and the pulldown
alphanumeric window will close. [PATH] must be set to an existing directory name or
left blank. The System will always reference the directory currently active on the File
Utility screen and then the specified path when performing Preset File operations.
3-5.
Once all screen information has been entered as required, the menu bar function may
be utilized as follows:
[SAVE]:
Selecting [SAVE] will save the specified file types to the specified
[DRIVE] / [PATH].
[COMPARE]:
Selecting [COMPARE] will compare the specified file types from the
System memory to the specified [DRIVE]/[PATH]/[FILE NAME].
[LOAD]:
Selecting [LOAD] will load the specified file types into the System
memory from the specified [DRIVE] / [PATH] / [FILE NAME].
NOTE: The files must be loaded in the following order:
????.CFG, ????.SEQ, then ????.PAR
[DELETE ]:
Selecting [DELETE] will delete the specified file types from the
specified [DRIVE] / [PATH].
[DIR]:
Selecting [DIR] will display the file/directory listing specified
[DRIVE] / [PATH].
3-6.
To print out the data file utility screen, move the cursor on the menu bar to [PRINT]
and depress the
[↵]
key.
Chapter 7: System Operation
Page 7-84