FEC AFC1200 - Manual (Page 42)

)(& ,QF
7.5 SET SEQUENCE
THe function of this screen is to setup the fastening sequences for all spindles.
7.5.1 TABLE OF CONTENTS
7.5.1. Table of Contents for Set Sequence screens
7.5.2. SEQUence Select
7.5.3. SPindle Setup
7.5.4. SEQuence Setup
7.5.5. SEQUENce Function (FUN) Explanation
7.5.6. SEQUENCe Data (DAT) Explanation
7.5.7. copy FUNCTION (Spindle to spindle)
7.5.8. sequence coPY FUNCTION (Sequence to sequence)
7.5.9. SEquence CLEAR FUNction
7.5.10. SCreen SCROLLING aND PRINT FUNCtions
7.5.2 SEQUENCE SELECT
2-1. AFTEr selecting [SET SEQUENCE] from the main pulldown menu, depress the
[↵]
key and the screen will change to the "SET SEQUENCE" screen.
2-2. MOve the cursor on the menu bar to the [SEQUENCE SELECT] position using the
[←] [→]
keys and depress the
[↵]
key. THE SEQUENCE SELEct window will
appear with the cursor highlighting the current sequence.
2-3. USING the
[←] [→]
keys, select the desired sequence number and depress the
[↵]
key. THe screen will display the "SET SEQUENCE" screen with the selected
SEQUENCE No. (#1 thru 8) in the upper right hand corner.
FIG. 7-5-2 set sequence, sequence select
7.5.3 SPINDLE SETUP
3-1.
PLAce the "RUN/PROGRAM" key switch in the PROGRAM position.
3-2. DEPress the [SEL] key and the cursor will highlight the area below the SP NO.
heading. USing the numerical keys, enter a spindle number from 01 thru 24 and
depress the
[↵]
key.
NOTE: The HEAD (HD) column is automatically set from values entered on the MACHINE
CONFIGURATION screen.
Chapter 7: System Operation
Page 7-42