FEC AFC1200 User Manual
Page 51
)(& ,QF
7.6
SEQUENCE INDICATION
THE function of this screen is to monitor the fastening sequence as the fastening is in
process.
7.6.1 TABLE OF CONTENTS
7.6.1. TABLE of Contents for SEQUENCE INDICATION screens
7.6.2. SCREEN
EXPLANATION
7.6.3. SEQUENCE
SELECT
7.6.4. SCREEN SCROLLING AND PRINT FUNCTIONs
7.6.2 sCREEN EXPLANATION
2-1.
THE SEQUENCE INDICation screen will monitor the actual operation of each
fastening to assure that each sequence step is being completed. THE screen setup is
similar to the SET SEQUEnce screen with the headings:
SP
SPINDLE NO. (1-24)
H
POWERHEAD (A-B-C-D)
G
GROUP FASTENING NO. (01-24)
P
FASTENING PARAMETER NO. (1-8)
S
SELF-CHECK FUNCTIONS (X=DISABLED O=ENABLED)
O
OFFSET CHECK (X=DISABLED O=ENABLED)
C
OFFSET CORRECTION (X=DISABLED O=ENABLED)
S01
SEQUENCE STEPS (01-32)
2-2.
WHile each fastening step is active, the function remains highlighted to indicate
where the fastening sequence is during the entire rundown.
FIG. 7-6-2 sequence indication screen
Chapter 7: System Operation
Page 7-51