Ransburg RMA-560 Single_Dual Purge Direct A13364 - Manual (Page 11)

internal safety circuits will shut down the system
on over-current and cable faults.
With additional control modules, all of the functions
of the RMA-560 and MicroPak can be controlled
by a programmable controller. A Serial Atomizer
Module pneumatically controls the speed of the
rotary atomizer with dynamic feedback through a
fiber optic transmitter located on the applicator. A
Serial Digital Module pneumatically controls the
paint, solvent, and dump valves located on the
atomizer. An I/O module provides communication
between these modules and the PLC.
The above modules are mounted in one 19-inch
rack and interconnected through a common
mother board.
RMA-560 Single/Dual Purge Direct Charge - Introduction
Ransburg
LN-9278-13 8