Ransburg RMA-560 Single_Dual Purge Direct A13364 - Manual (Page 53)

RMA-560 PREVENTIVE MAINTENANCE SCHEDULE
Procedure Yearly 6 Months 3 Months Monthly 2 Weeks Weekly End of Shift Mid-Shift
Mid Shift Cleaning
• Wipe shroud
• Visually inspect cup
End of Shift Cleaning
• Wipe shroud
• Wipe bell cup down
• Change cloth cover
Shaping Air Shroud
• Clean inner shape air ring
• Clean outer shape air ring
• Remove and clean
Bell cup removal/inspection/
cleaning
Fluid tip inspection/cleaning
Inspect Valve and Seat
Assembly in valve module
for leaking
Replace Valves and Seats
in valve module
Low Voltage Cable
Inspections
High Voltage Testing
Inspection of Tubing Bundle
Regrease Tubing Bundle
Replace Tubing Bundle
Inspect Turbine Spindle
taper and threads
Replace Bell Cups
Inspect all screws
• Replace if broken
• Inspect for wear
• Tighten per specifications
Replace Splash Plates
Inspect and Clean Spindle
Bore and Fluid Tube OD
Inspect for Fluid Leaks Daily
Check External Cup Flush
Carbide Tip for blockage
Inspect O-rings on tubing
bundle fittings
Inspect tubing bundle fitting
seals and receivers
Frequency (Maximum)
•
•
• • •
• •
• •
•
•
•
•
•
• •
• •
• •
•
• •
• •
• •
• •
•
RMA-560 Single/Dual Purge Direct Charge - Maintenance
Ransburg
LN-9278-13 50