Ransburg RMA-560 Single_Dual Purge Direct A13364 - Manual (Page 66)

Turbine Exhaust
The turbine exhaust tube is designed to prevent
unwanted materials from entering the turbine
assembly while providing a free flowing exhaust
route. The end on the exhaust tube is protected
with a simple diaphragm that closes when the
turbine is off but folds out of the way during op-
eration. The diaphragm is held in place with a
plastic screw. This diaphragm should be replaced
periodically to insure proper operation. Tighten
screw to 5 lbs./in. (0.56Nm) torque.
RMA-560 Single/Dual Purge Direct Charge - Maintenance
Ransburg
LN-9278-13 63