IAI America PDR-101-MW - Manual (Page 26)

16
4.3 Power-Supply Input Interface
Connect the power supply specified in 2.1, “Specification List,” to P-Driver.
It must be possible to cut off the AC power supply via an electromagnetic contact in case of an emergency
stop.
(1) Commercial Power
a. 100 V specification: single-phase, 100 to 115 VAC ±10%, 50/60 Hz
b. 200 V specification: single-phase, 200 to 230 VAC
±10%, 50/60 Hz
List of AC power-supply input connector terminals (Phoenix GMSTB2.5/3-GF-7.62 DIP)
Symbol Function
L
N
Main power-supply input terminals
PE
Ground terminal; perform D-class (third-class) grounding or higher.
* Connectors (plugs) are standard accessories.