IAI America PDR-101-MW - Manual (Page 96)

86
* When you open the Edit Parameter window for the first time after starting the application, the
parameter input ranges are acquired from the driver.
In the offline mode, default values in the application are used for the parameter input ranges.
9.4.2 Saving Parameters and Completing Editing
(1) Saving Parameter Data Currently Being Edited to a File
Click the Save As button in the Edit Parameter window.
* The extension of parameter files is “pdp.”
(2) Transferring Parameter Data Currently Being Edited to the Driver
Save parameter data you are editing to the non-volatile memory area of the driver.
Click the Transfer to Driver button in the Edit Parameter window.
This button can only be used at online editing.
(3) Restarting the Driver (Software Reset)
After you transfer parameter data, a confirmation dialog box (Figure 9.4.2) appears with the message
“Restart driver No.0?”
Figure 9.4.2 Confirmation
Yes (Y) Enable the parameters you have changed.
No (N) Some of the parameters you have changed are not enabled.
In order to enable all the parameters you have changed, restart the driver (software
reset) or turn off the power supply and back on again.
(4) Completing Editing Parameters
When you close the Edit Parameter window, a confirmation dialog box appears with the message
“Transmit Edited Data to the Driver?”