IAI America SEL-TG - Manual (Page 285)

267
*DWHZD\)XQFWLRQ
$VVRFLDWHG
267
(6) Position Check
:KHQWKH5&DFWXDWRULVPRYHGWRWKHSODFHFRUUHVSRQGLQJWRWKHWDXJKWSRVLWLRQGDWDWKH
position check can be performed.
Ԙ Movement
0RYHWKH5&DFWXDWRUWRWKHSRVLWLRQFRUUHVSRQGLQJWRWKHSRVLWLRQGDWDWUDQVIHUUHGWRWKH
controller.
Axis No.
Position No.
Select the Axis No. to be moved and press the
key.
* The selection of the Axis No. is performed using
the ten-key or key.
Select the Position No. to which the actuator is
moved and the press the key.
* The selection of the Position No. is performed
using the ten-key or key.
Turn the servo-motor ON.
Perform the home return operation.
Press the key.
When the or key is pressed after the
MOVE LED is turned ON, the axis movement is
started.
When it is stopped on the way, press the key.
* When the key is pressed, the “processing
for the stop operation” is performed to all the
effective axes.