IAI America SEL-TG User Manual
Page 300
Advertising
* Supplement
282
Press the ESC key several times to move to the Flash ROM writing screen.
Write the data to Flash ROM.
Press the F1 (Yes) key.
Execute restart (software reset).
Press the F1 (Yes) key.
(3) Execute an absolute reset according to the following special procedure (forced operation by
ignoring the screen steps):
Mode Transition:
㽲([HFXWHWKH³HQFRGHUPXOWLURWDWLRQGDWDUHVHW³IRUWKHVODYHD[LV
Input the axis No. of the slave axis and press the
return key.
Press the F1 (OK) key.
Press the F1 (OK) key.
Exit from the absolute reset mode temporarily with
the ESC key, without pressing the F1 (OK) key.
Advertising