IAI America SEL-TG - Manual (Page 287)

269
*DWHZD\)XQFWLRQ
$VVRFLDWHG
269
Turn the servo-motor ON.
Perform the home return operation.
Press the key.
When the or key is pressed after the MOVE
LED is turned ON, the axis movement is started.
When it is stopped on the way, press the
key.
* When the key is pressed, the “processing
for the stop operation” is performed for all the
effective axes.
CAUTION :
Sometimes it takes some time before movement
commences after the key or
key is pressed. Be careful.
(The time interval for movement start varies
depending on the number of registered position
data items).