Receiving handheld, Receiving handheld data – IntelliTrack Package Track User Manual
Page 175
Chapter 9
Using the Handheld
159
tion process may be initiated from the handheld device or from the Batch
Synchronization Utility.
•
For more information about uploading data from the handheld applica-
tion to the Batch Synchronization Utility, please refer to the following
section.
•
For more information about uploading data to the workstation via the
handheld application, please refer to
“Sending Data to the Workstation
.
Receiving Handheld Data
To receive the data updates from the handheld application with the DMS
Batch Synchronization Utility, please refer to the steps that follow.
1.
From the DMS Batch Synchronization Utility, tap the Upload Data tab
to bring this portion of the utility to the front.
2.
Click the Receive Data button to initiate the data upload from the
handheld application. A message appears, telling you to check confirm
that your handheld device is properly connected and ready to synchro-
nize data.