Uploading data from the handheld application, Receiving handheld data, Uploading data from the handheld application 67 – IntelliTrack Package Track User Manual

Page 83

Advertising
background image

Chapter 4

System Options

67

Uploading
Data from the
Handheld
Application

Important:You must register and activate the Package Track application in
order to send handheld application data to the workstation application. If
your application is not registered, you cannot upload data from the hand-
held application to the workstation application. To send the batch registra-
tion files to the handheld application, register your Package Track
application and then download data to the handheld application via the
Send Data tab. (Please refer to

“Sending Data to the Batch Portable Appli-

cation” on page 63

.

For more information about uploading data from the handheld applica-
tion to the Batch Synchronization Utility, please refer to the following
section.

For more information about uploading data to the workstation via the
handheld application, please refer to

“Sending Data to the Workstation

Application” on page 164

.

Receiving Handheld Data

To receive data from the handheld application with the DMS Batch Syn-
chronization Utility, please refer to the steps that follow.

1.

From the DMS Batch Synchronization Utility, tap the Upload Data tab
to bring this portion of the utility to the front.

2.

Click the Receive Data button to initiate the data upload from the
handheld application. A message appears, telling you to check confirm

Advertising