ZOLL AED Pro Rev J - Manual (Page 110)

C ONFIGURABLE S ETTINGS
C–2 www.zoll.com 9650-0350-01 Rev. J
Descriptions of AED Pro Configurable Settings
Configurable Option Possible Values
General Settings
Self-test Interval
Sets the period of time between automated self-tests in
standby state.
• 1 day — default
• 2 days
• 3 days
• 4 days
• 5 days
• 6 days
• 7 days
Line Frequency
Selects the AC power frequency to be filtered during
ECG monitoring.
• 60 Hz — default
• 50 Hz
Power Down Delay
Sets the time interval after which the unit powers off if
no patient connection is detected.
• 5 minutes
• 10 minutes — default
• 15 minutes
• 20 minutes
• 30 minutes
Audio Volume
Sets the volume level for voice messages and tones.
• High — default
• Medium
• Low
Number of Patient Records
Sets the number of patients for whom information will
be stored in nonvolatile flash memory.
• 1
• 2
• 3
• 4 — default
Audio Recording Enabled
Enables the use of the Audio Recording Option
(requires the installation of an internal microphone
when the AED Pro unit is manufactured).
Note: You must set the Number of Patient Records to
1 before you can enable the Audio Recording
Option.
• Disabled — default
• Enabled
Monthly Test
When checked (On), the unit performs a monthly
full-energy self-test (120 joules).
• On — default
• Off
Daylight Savings
Allows the AED Pro’s 24-hour clock to automatically
adjust for Daylight Savings Time.
• Manual — default
• US Pre-2007
• US
• EU
• EU Southern Hemisphere
Number of Shocks
Sets the number of shocks in the shock sequence to 1,
2, or 3 shocks.
• 1 Shock — default
• 2 Shocks
• 3 Shocks