Installing a battery pack – ZOLL AED Pro Rev J User Manual
Page 35
Installing a Battery Pack
9650-0350-01 Rev. J
ZOLL AED Pro Operator’s Guide
2–3
4
Slide out the cover panel.
5
If a battery is installed, remove it from the
compartment by pressing the tab on the
battery pack.
6
Align the tab of the new battery with the
finger access area on the left side of the
battery compartment, then place the
battery into the compartment.
The shape of the battery pack allows it to seat
itself properly.
7
Press the edge of the battery pack until it
clicks into place.
8
Slide the cover panel back into place, and
then lower the edge of the cover.
9
Raise the compartment latch, and tilt the
top edge toward the unit.
10
Press the bottom edge of the latch toward
the unit to lock the cover in place.
Step
Action
Notes
ZM040006A
ZM040005A
ZM040007A
ZM040007A