ZOLL AED Pro Rev J - Manual (Page 74)

C HAPTER 6 N ONRESCUE M ODE
6–2 www.zoll.com 9650-0350-01 Rev. J
Entering Nonrescue Mode
To place the AED Pro unit in Nonrescue Mode:
If using an IrDA connection, make sure the connection is established before starting the
AED Pro unit. Refer to “Setting Up Data Communications with an IrDA Connection” on
page 6-4.
Step Action Result
1 If the unit is on, press and hold the On/Off
button for 1 second to turn off the unit.
Wait until the message POWERING OFF
disappears.
The unit powers off.
2 Press and hold the On/Off button for at
least 5 seconds. The unit issues the voice and text message:
UNIT OK
VERSIONS
00:00:12
UNIT OK
B:01.51 L:01.67 P:02.61
H:02.00 C:02.00
USB SET TIME