ZOLL AED Pro Rev J - Manual (Page 78)

C HAPTER 6 N ONRESCUE M ODE
6–6 www.zoll.com 9650-0350-01 Rev. J
While in the SET TIME menu, if no softkeys are presssed and there is no IrDA connection
established, the unit powers off after 30 seconds.
Device Configuration
The AED Pro unit provides configurable settings to suit the needs of your organization and its
medical protocols. Before putting the unit into service for the first time, the administrator
should inspect the factory settings and make any required adjustments.
Operators cannot adjust these settings while the unit is in clinical use.
For more information, refer to Appendix C, “Configurable Settings.”
ZOLL Administration Software
ZOLL Administration Software (ZAS) helps you perform software maintenance tasks when the
AED Pro unit is communicating with a personal computer. Using ZAS, you can transfer data
from the AED Pro unit to a computer. From the computer, you can transmit the data to a
network or print the data to a local printer.
For instructions on using ZAS, refer to its online help.
Installing ZOLL Administration Software
To install ZOLL Administration Software, insert the ZOLL Administration Software CD into a
CD-ROM drive on the computer. The installation program starts automatically.
If the installation program does not start, do the following:
1. From the Windows Start menu, select Run.
2. In the Open field, type
x:setup.exe
(where x is the letter of the CD-ROM drive that contains the ZAS CD).
3. Click OK.
Follow the on-screen instructions to complete the installation.
VERSIONS
00:00:26
2007-06-25,
B:01.51 L:01.67 P:02.61
H:02.00 C:02.00
X
18:02:02