Parameters, Cycle time, Control output hysteresis – Watlow MICRODIN User Manual
Page 64: Pid group continued
Advertising
Parameters
5 . 1 6 Wa t l o w M i c r o D I N
= R e a d O n l y ;
= R e a d / W r i t e ;
= Tu r n O n / O f f
ON
PID Group continued
Cycle Time
• Set the control output cycle time in seconds.
• Read/write
• Modbus: 506
Range
0.1 to 60.0 seconds
Default
2.0
Active
if Propband (PID Group) is not set to 0 and Units Type (System
Group) is set to US
Control Output Hysteresis
• Set the control output switching hysteresis.
• Read/write
• Modbus: 507
Range
1 to 9999°F or °C
Default
3
Active
only if Propband is set to 0
Advertising