Alarm output group – use, Parameters, Alarm output hardware – Watlow MICRODIN User Manual
Page 66: Clear alarm, Silence alarm, Alarm output group continued
Advertising
Parameters
5 . 1 8 Wa t l o w M i c r o D I N
= R e a d O n l y ;
= R e a d / W r i t e ;
= Tu r n O n / O f f
ON
Alarm Output Hardware
• Read the alarm output hardware type.
• Read only
• Modbus: 17
Range
1: mechanical relay
Default
1
Active
always
Alarm Output Group – Use
Clear Alarm
• Alarm will clear if alarm condition is resolved
• Read/write
• Modbus: 331
Range
0: no action
1: try to clear a latched alarm
Default
0 (always reverts to 0 after a write)
Active
if Alarm Latching Mode (Alarm Output Group) is set to yes
Silence Alarm
• Silence the alarm manually.
• Read/write
• Modbus: 332
Range
0: no action
1: silence alarm
Default
0 (always reverts to 0 after a write)
Active
always
ON
ON
Alarm Output Group continued
Advertising