Spectra Precision ProFlex 800 Reference Manual User Manual
Page 118
104
Web Server Help Files Collection
Computed Position
This group returns information if the receiver is a rover. See
the description of each parameter in the table below.
Reference Position
This group returns information on the base (or the base used
if the receiver is a rover). See the description of each
parameter in the table below.
Parameter
Designation
$PASHQ
Position Type
“Autonomous”, “S-DGPS”, “DGPS”, “RTK-
Float” or “RTK Fixed”.
POS
Age of Corrections
Age of differential corrections, in seconds.
Blank for a receiver not receiving correc-
tions.
Always blank for a base.
POS
Data Link Quality
A percentage describing the quality of the
corrections received. The greater the better.
see DDS, d7
Coordinate System
Name
Coordinate system in which the receiver
delivers its position solutions. Either “WGS
84” or as read from last RTCM-3 1021,
1023, 1025 message received.
see LCS
Latitude
Longitude
Ellipsoid Height
Latitude of computed position.
Longitude of computed position.
Height of computed position above ellip-
soid.
POS
Distance to Refer-
ence Station
Baseline length.
In a base, is representative of the deviation
between the entered reference position and
the computed position for the base (should
be a few meters max.).
VEC
RMS Latitude
RMS Longitude
RMS Height
Standard deviation of latitude error.
Standard deviation of longitude error.
Standard deviation of height error.
GST
Parameter
Designation
$PASHQ
Station ID
Station ID, as transmitted to the rover:
• 0-1023 (RTCM 2.3)
• 0-4095 (RTCM 3.x and ATOM)
• 0-31 (CMR & CMR+)
STI
Latitude
Longitude
Ellipsoid Height
Latitude of reference position.
Longitude of reference position.
Height of reference position above ellipsoid.
CPD,POS
Antenna Name
Name of the GNSS antenna connected to
the receiver, a case-sensitive parameter (31
characters max.)
ANP
Antenna Height
Antenna height above reference point
CPD,ANT