Spectra Precision ProFlex 800 Reference Manual - Manual (Page 449)

435
Set Command Library
RDP,ON: Powering On the Internal Radio
Function This command is used to power on the internal radio.
Command Format Syntax
$PASHS,RDP,ON[*cc]
Parameters
None.
Example
Turning on the internal radio:
$PASHS,RDP,ON*1E
Relevant Query
Command
$PASHQ,RDP,PAR,D
See also $PASHS,RDP,OFF
$PASHS,RDP,PAR
RDP,PAR: Setting the Radio
Function This command is used to set the radio connected to the
specified port.
Command Format Syntax
$PASHS,RDP,PAR,c1,s2,d3,[s4],[c5],[d6],[s7],[c8],[c9][s10][*cc]
Parameters
Parameter Description Range
c1
ID of the port connected to the radio you want
to set.
A, B, D, F