Relevant set command, Rcp: receiver parameters, Function – Spectra Precision ProFlex 800 Reference Manual User Manual
Page 617: Command format, Response format
603
Query Command Library
Relevant Set
Command
$PASHS,RAW
RCP: Receiver Parameters
Function
This command returns the list of pre-defined receiver names,
and for user-defined receivers, their GLONASS carrier phase
biases.
Command Format
Syntax
$PASHQ,RCP[*cc]
or
$PASHQ,RCP,s1[*cc]
Parameters
Response Format
The response is in user-readable form.
$PASHQ,RCP
PREDEFINED RECEIVER LIST (d1):
ASHTECH ProMark800
ProFlex800 MB500
PM5 MMapper100
ProMark100 ProMark200
MB100 NOVATEL
TRIMBLE SEPTENTRIO
TOPCON
USERDEFINED RECEIVER LIST (d2):
RCV10 RCV11
RCV12 RCV13
…
OWN RECEIVER: ProFlex800
REFERENCE RECEIVER:
RECEIVED RECEIVER:
2
1200
9
115200
3
2400
10
230400
4
4800
11
460800
5
9600
12
921600
6
19200
13
1428571
Code
Baud Rate
Code
Baud Rate
Parameter
Description
Range
s1
Name of the receiver (case sensitive).
If s1 is omitted, the parameters for all the receiv-
ers described in the database are listed.
31 characters
max.
*cc
Checksum
*00-*FF