Relevant set command, Rec: raw data recording status, Function – Spectra Precision ProFlex 800 Reference Manual User Manual
Page 629: Command format, Response format
615
Query Command Library
$PASHQ,RDP,TYP,A
$PASHR,RDP,TYP,A,MGL*44
If an internal PDL radio receiver is used:
$PASHQ,RDP,TYP,D
$PASHR,RDP,TYP,D,PDL*5F
Relevant Set
Command
$PASHS,RDP,TYP
REC: Raw Data Recording Status
Function
This command allows you to read the current raw data
recording status.
Command Format
Syntax
$PASHQ,REC[*cc]
Response Format
Syntax
$PASHR,REC,c*cc
Parameters
Example
$PASHQ,REC
$PASHR,REC,N*42
Parameter
Description
Range
c
Control character:
• Y: Yes. Data recording in progress. Receiver will
start recording data automatically when you next
turn it on.
• N: No. No data recording in progress. Receiver
will not start recording data automatically when
you next turn it on.
• S: Stop. No data recording in progress but the
receiver will start recording data automatically
when you next turn it on.
• R: Record. Data recording in progress but the
receiver will not start recording data automati-
cally when you next turn it on.
Y, N, S, R
*cc
Checksum
*00-*FF