Ttt: event marker, Content, Example – Spectra Precision ProFlex 800 Reference Manual User Manual
Page 702: See also
Advertising

688
Data Output
TTT: Event Marker
Content
This message delivers the exact GPS time, to within
1 μsecond, when an external event is detected.
The message is sent through port B, where the event marker
input pin is located, and not through the port specified by the
$PASHS, NME command.
The message is therefore independent of the NMEA output
rate. It can be output at a faster or slower rate than the NMEA
rate, depending on the recurrence of the event.
The message is as follows:
$PASHR,TTT,d1,m2*cc
d1 and m2 are described in the table below.
Example
$PASHR,TTT,3,18:01:33.1200417*AC
See Also
$PASHS,NME,TTT
Parameter
Description
Range
d1
Day in week (1: Sunday; 7: Saturday)
1-7
m2
GPS time tag, in hours, minutes and sec-
onds
0-23:59:59.9999999
*cc
Checksum
*00-*FF
Advertising