Spectra Precision ProFlex 800 Reference Manual - Manual (Page 459)

445
Set Command Library
RFT: Choosing File Format for Meteorological & Tiltmeter Data
Function This command is used to choose the format in which the
meteorological and tiltmeter data files will be recorded.
Command Format Syntax
$PASHS,RFT,d[*cc]
Parameters
Comments
D-files are structured as follows:
C <GPS seconds of week>,<GPS week>
$GPXDR,…
Example
Choosing D-file format:
$PASHS,RFT,1*28
Relevant Query
Command
$PASHQ,RFT
See Also $PASHS,REC
RNX,TYP: ATOM RNX Differential Message
Function This command is used in a receiver used as a base to define
the type and output rate of the ATOM RNX message generated
by the base.
This command is now used as a replacement to the $PASHS,
ATD,TYP command, which was made obsolete in May 2010.
Parameter Description Range Default
d
File format:
• 0: G-file
• 1: D-file and G-file
0, 1 0
*cc Optional checksum *00-*FF