Relevant set command, See also, Phe: active edge of event marker pulse – Spectra Precision ProFlex 800 Reference Manual User Manual
Page 607: Function, Command format, Response format
Advertising
593
Query Command Library
Parameters
Example
$PASHQ,PEM
$PASHR,PEM,9*39
Relevant Set
Command
$PASHS,PEM
See also
$PASHQ,ELM
PHE: Active Edge of Event Marker Pulse
Function
This command is used to read the current choice of active
edge for the event marker pulse (photogrammetry).
Command Format
Syntax
$PASHQ,PHE[*cc]
Response Format
Syntax
$PASHR,PHE,c*cc
Parameters
Example
$PASHQ,PHE
$PASHR,PHE,R*57
Relevant Set
Command
$PASHS,PHE
Parameter
Description
Range
d1
Elevation mask angle
0-90°
*cc
Checksum
*00-*FF
Parameter
Description
Range
c
Active edge:
• R: Rising
• F: Falling
R, F
*cc
Checksum
*00-*FF
Advertising