Spectra Precision ProFlex 800 Reference Manual - Manual (Page 462)

448
Set Command Library
• IP address
• Sub-network mask
• Gateway IP address
• DNS 1 IP address
DNS 2 IP
address Relevant
Query Command
None.
See also $PASHS,INI
RTC,MSG: Defining a User Message
Function This command is used to input a user message that a base
will be able to forward to a rover through RTCM message type
16, 36 or 1029. This command can only be applied to a base
receiver with message type 16 or 1029 enabled in the
receiver.
Command Format Syntax
$PASHS,RTC,MSG,s[*cc]
Parameters
Example
Submitting a user message:
$PASHS,RTC,MSG,<user message 90 characters max>
Relevant Query
Command
None.
See also $PASHS,RTC,TYP
$PASHS,BAS
$PASHS,CPD,MOD,BAS
Parameter Description Range
s User message 90 characters max.
*cc Optional checksum *00-*FF