Relevant set command, See also, Dbn,msi: dben message status – Spectra Precision ProFlex 800 Reference Manual User Manual
Page 547: Function, Command format, Response format, Example, Dcr: cartesian coordinates of baseline
533
Query Command Library
Relevant Set
Command
$PASHS,CTS
See also
$PASHQ,PRT
$PASHQ,MDP
DBN,MSI: DBEN Message Status
Function
This command is used in a base receiver to read the current
settings of the DBEN messages the base currently generates
and outputs.
Command Format
Syntax
$PASHQ,DBN,MSI[*cc]
Response Format
Syntax
$PASHR,DBN,MSI,d1,RPC,d2,BPS,d3*cc
Parameters
Example
$PASHQ,DBN,MSI
$PASHR,DBN,MSI,2,RPC,1.0,BPS,30.0*6B
See also
$PASHS,DBN,TYP
$PASHQ,BAS
$PASHQ,CPD,MOD
DCR: Cartesian Coordinates of Baseline
Function
This command allows you to output the DCR message
containing the ECEF components of the baseline for the last
Parameter
Description
Range
d1
Number of DBEN messages currently output (always 2) 2
RPC,d2
“RPC” message type output rate, in seconds
0-300
BPS,d3
“BPS” message type output rate, in seconds
0-300
*cc
Checksum
*00-*FF