Relevant query command, See also, Rst: default settings – Spectra Precision ProFlex 800 Reference Manual User Manual
Page 461: Function, Command format, Comments
447
Set Command Library
Example
Choosing scenario 4 with 1 sec and 30 sec for the output
rates:
$PASHS,RNX,TYP,4,1,30*6A
Relevant Query
Command
$PASHQ,RNX,MSI
See Also
$PASHS,BAS
$PASHS,CPD,MOD,BAS
RST: Default Settings
Function
This command is used to reset the receiver parameters to
their default values.
Command Format
Syntax
$PASHS,RST[*cc]
Parameters
None.
Example
Resetting the receiver:
$PASHS,RST*20
Comments
The following GSM parameters are not affected by the
$PASHS,RST command:
• PIN code
• Access Point Name (GPRS)
• Login (GPRS)
• Password (GPRS)
• Net (automatic 2G/3G, or forced to 2G)
The following Ethernet parameters are not affected by the
$PASHS,RST command:
• DHCP setting
300
Same as scenario 100, but extended computed reference position fol-
lows each epoch.
Scenario
Number
Description