Spectra Precision ProFlex 800 Reference Manual - Manual (Page 410)

396
Set Command Library
LTZ: Time Zone
Function This command is used to set the local time zone.
Command Format Syntax
$PASHS,LTZ,d1,d2[*cc]
Parameters
Example
Setting local time to UTC+2:
$PASHS,LTZ,2,0*35
Relevant Query
Command
$PASHQ,ZDA
$PASHQ,LTZ
See also $PASHS,ZDA
MDM,INI: Initializing the Modem
Function This command is used to initialize the modem.
Command Format Syntax
$PASHS,MDM,INI[*cc]
Parameters
None.
Example
Initializing the modem:
$PASHS,MDM,INI
If modem initialization is successful, you will get the
following answer:
Parameter Description Range Default
d1 Local time zone (hours). -13 to +13 0
d2 Local time zone (minutes) 0-59 0
*cc Optional checksum *00-*FF