Spectra Precision ProFlex 800 Reference Manual - Manual (Page 558)

544
Query Command Library
Relevant Set
Command
$PASHS,DST
DSY: Daisy Chain Status
Function This command queries the receiver for the status of the daisy
chain function.
Command Format Syntax
$PASHQ,DSY[*cc]
Parameters
None.
Response Format Syntax
$PASHR,DSY,OFF*59
or
$PASHR,DSY,c1,c2,d3*cc
Parameters
Example
Command reporting data on port A forwarded to port C:
Parameter Description Range
c1
Source port:
• A, B, F: Serial ports
• C: Bluetooth port
• D: Radio
• E: Modem
• H: Second GNSS board
• I, P, Q: Ethernet port
A-I, P, Q
c2
Destination port:
• A, B, F: Serial ports
• C: Bluetooth port
• D: Radio
• E: Modem
• H: Second GNSS board
• I, P, Q: Ethernet port
A-I, P, Q
d3
Mode:
• 0: Raw (default)
• 1: Block
0,1
*cc Checksum *00-*FF