GW Instek GDS-200 Series Programming Manual - Manual (Page 107)

COMMAND DETAILS
107
<file path> Recall a file from the DSO internal disk.
Example :RECAll:SETUp S1
Recalls setup setting S1 from memory.
:RECAll:SETUp “Disk:/DS0001.SET”
Recall setup setting DS0001.SET from system internal
disk.
:RECAll:SETUp:NOTE
Description Writes a note/overwrites the text note that was
previously saved from the last setup file.
Syntax :RECAll:SETUp:NOTE {<string>}
Parameter <string> Max. 50 character string enclosed in
double quotes.
Example :RECAll:SETUp:NOTE “this is a note”
“this is a note” becomes the note for the last saved
setup note.
:RECAll:WAVEform
Description Recalls a waveform from wave1~wave20 or from
file to REF1~2
Note For *.CSV files, only record lengths of 1k or 10k
points can be recalled. *.LSF files have no such
limitation.
Syntax :RECAll:WAVEform {W<n> | <file path>
(“Disk:/xxx.LSF”)},REF<X>
Parameter n 1~20 (Wave1~wave20)
xxx.LSF Filename in file path.
<X> 1,2 (REF1, REF2)
Example :RECAll:WAVEform W1, REF1
Recalls the waveform stored in Wave1 to reference
1.
Set
Set