GW Instek GDS-200 Series Programming Manual - Manual (Page 64)

GDS-200 & GDS-300 Programming Manual
64
:MEASure:CMEan
Description Returns the mean voltage/current of one full
period.
Syntax :MEASure:CMEan?
Related
Commands :MEASure:SOURce<X>
Return parameter <NR3> Returns the cyclic mean.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:CMEan?
9.480E-01
Selects Channel 1, and then measures the mean
value of the first period.
:MEASure:RMS
Description Returns the root-mean-square voltage/current of
one or more full periods.
Syntax :MEASure:RMS?
Related
Commands :MEASure:SOURce<X>
Return parameter <NR3> Returns the RMS value.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Query
Query