GW Instek GDS-200 Series Programming Manual - Manual (Page 33)

COMMAND DETAILS
33
Vertical Commands
:CHANnel<X>:BWLimit .............................................. 33
:CHANnel<X>:COUPling ............................................ 33
:CHANnel<X>:DISPlay ............................................... 34
:CHANnel<X>:EXPand ............................................... 34
:CHANnel<X>:INVert ................................................. 35
:CHANnel<X>:POSition ............................................. 35
:CHANnel<X>:PROBe:RATio ..................................... 36
:CHANnel<X>:PROBe:TYPe ....................................... 36
:CHANnel<X>:SCALe ................................................. 36
:CHANnel<X>:BWLimit
Description Sets or returns the bandwidth limit (20MHz)
on/off.
Syntax :CHANnel<X>:BWLimit {OFF | ON | ?}
Parameter <X> Specified channel 1,2
ON Bandwidth limit is on.
OFF Bandwidth limit is off.
Return parameter Returns the bandwidth limit status for the selected
channel.
Example :CHANnel1:BWLimit ON
Sets the channel 1 bandwidth limit on.
:CHANnel<X>:COUPling
Description Selects or returns the coupling mode.
Syntax CHANnel<X>:COUPling {AC | DC | GND | ?}
Parameter <X> Channel 1,2
AC AC coupling
Set
Query
Set
Query