GW Instek GDS-200 Series Programming Manual - Manual (Page 70)

GDS-200 & GDS-300 Programming Manual
70
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:PERiod?
1.0E-3
Selects Channel 1, and then measures the period.
:MEASure:RISe
Description Returns the first pulse rise time.
Syntax :MEASure:RISe?
Related
Commands :MEASure:SOURce<X>
Return parameter <NR3> Returns the rise time.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:RISe?
8.5E-6
Selects Channel 1, and then measures the rise time.
:MEASure:FALL
Description Returns the fall time measurement result.
Syntax :MEASure:FALL?
Related
Commands :MEASure:SOURce<X>
Return parameter <NR3>
Chan Off Indicates the source channel is not
activated.
Query
Query