GW Instek GDS-200 Series Programming Manual - Manual (Page 88)

GDS-200 & GDS-300 Programming Manual
88
Parameter <X> Reference waveform 1, 2
<NRf> Horizontal co-ordinates
Return parameter <NR3> Returns the reference waveform position
Example :REF1:TIMebase:POSition -5.000E-5
Selects reference 1, and then sets the horizontal
position to -50us.
:REF<X>:TIMebase:SCALe
Description Sets or returns the selected reference waveform
time base scale.
Syntax :REF<X>:TIMebase:SCALe { <NRf> | ?}
Related
commands :REF<X>:DISPlay
Parameter <X> Reference waveform 1, 2
<NRf> Horizontal scale
Return parameter <NR3> Returns the reference waveform scale.
Example :REF1:TIMebase:SCALe 5.00E-4
Selects reference 1, and then sets the horizontal
scale to 500us/div.
:REF<X>:OFFSet
Description Sets or returns the selected reference waveform
vertical position (offset).
Syntax :REF<X>:OFFSet { <NRf> | ?}
Related
commands :REF<X>:DISPlay
Parameter <X> Reference waveform 1, 2
<NRf> Vertical offset
Return parameter <NR3> Returns the reference waveform vertical
position.
Set
Query
Set
Query