GW Instek GDS-200 Series Programming Manual - Manual (Page 13)

COMMAND OVERVIEW
13
Command format 1: command header
2: single space
3: parameter
4: message terminator
Parameter Type Description Example
<Boolean> boolean logic 0, 1
<NR1> Integers 0, 1, 2, 3
<NR2> floating point 0.1, 3.14, 8.5
<NR3> floating point
with an exponent 4.5e-1, 8.25e+1
<NRf> any of NR1, 2, 3 1, 1.5, 4.5e-1
Message
terminator LF line feed code
Note Commands are non-case sensitive.
:TIMebase:SCALe <NR3>LF
1 2 3 4