GW Instek GDS-200 Series Programming Manual - Manual (Page 93)

COMMAND DETAILS
93
Timebase Commands
:TIMebase:POSition ................................................... 93
:TIMebase:SCALe ........................................................ 93
:TIMebase:MODe ....................................................... 94
:TIMebase:WINDow:POSition ................................... 94
:TIMebase:WINDow:SCALe ....................................... 95
:TIMebase:EXPand ..................................................... 95
:TIMebase:POSition
Description Sets or queries the horizontal position.
Syntax :TIMebase:POSition {<NRf> | ?}
Parameter <NRf> Horizontal position.
Return parameter <NR3> Returns the horizontal position.
Example :TIMebase:POSition 5.00E-4
Sets the horizontal position as 500us.
:TIMebase:SCALe
Description Sets or queries the horizontal scale.
Syntax :TIMebase:SCALe {<NRf> | ?}
Parameter <NRf> Horizontal scale
Return parameter <NR3> Returns the horizontal scale.
Example :TIMebase:SCALe 5.00E-2
Sets the horizontal scale to 50ms/div.
Set
Query
Set
Query